Pnuematic jumbolter

Pneumatic jumbolter with the landing leg are widely adapt to the coal roadway's bolting work.

MQT - 120/2.3 Pneumatic jumbolter

 

Application:

MQT-120/2.3 Pneumatic jumbolter are widely used in rock hardness acuities ≤f10 roadway, especially adapt to the coal roadway's bolting work, can drill roof bolt hole, and drilling anchor hole, still can mix and install the resin cartridge anchor rod and anchor rope, without any other equipments, can be tighten the bolt and nut suitably at once,achieve initial anchor pre-stressing force requirements.

 

Characteristics:

- Small in size, light weight, simple manipulation, easy maintenance.

- Gear type pneumatic motor and stable running, high reliability.

- New glass reinforced plastic gas leg design, high reliability, long service life.

 

Main Parameters:

Working Air pressure	MPa	0.4	0.5	0.63
No-load speed	r/min	≥400	≥450	≥500
Maximum load torque	N.m	≥180	≥230	≥280
Rated speed	r/min	175	175	175
Rated torque	N.m	≥90	≥120	≥150
Rated power	kW	≥1.8	≥2.3	≥3.0
1/2 no-load speed	r/min	≥200	≥225	≥250
1/2 no-load speed torque	N.m	≥90	≥100	≥110
Gas consumption	m3/min	≤3.0	≤3.8	≤4.8
Maximum propulsion	kN	≥6.0	≥7.5	≥9.5
Noise	dB(A)	≤95	≤95	≤95
Flushing water pressure	MPa	0.6~1.2
Shank hexagon size	mm	19(22)
Jumbolter series		MQT-120/2.3-A	MQT-120/2.3-B	MQT-120/2.3-C
The shrinkage height	mm	1126.5±50	1276.5±50	1426.5±50
The elongation height	mm	2457.5±50	3057.5±50	3657.5±50
Total weight	kg	46±2	51±2	53±2

Pnuematic jumbolter